Filter
Top Products
6
www.insigniaproducts.com
Reconnecting to a paired device
The Bluetooth connection is lost if you:
• Turn off your speaker system
• Move the Bluetooth device out of range of your
speaker system
• Turn off your Bluetooth device
• Turn off the Bluetooth feature on your Bluetooth
device
When your speaker system is not paired to a device,
the blue LED blinks slowly.
To reconnect a paired a device:
1 If your speaker system is turned off, turn it on.
The blue LED on your speaker system blinks
rapidly and your speaker system searches for
the last connected Bluetooth device. When your
speaker system pairs with the device, the blue
LED lights solid.
2 Make sure that your Bluetooth device is turned
on, the Bluetooth feature on the device is
turned on, and the device is within range of
your speaker system with no obstructions
between your speaker system and the device.
Connecting to a different device
To connect to a different device:
1 If a Bluetooth device is connected to your
speaker system:
• Move the device out of range of your speaker
system.
OR
• Turn off the Bluetooth function on the
Bluetooth device.
OR
• Unpair your speaker system in the Bluetooth
device list.
2 Follow the instructions in “Pairing with a
Bluetooth device” on page 5.
Selecting a sound source
Your speaker system lets you listen to either
Bluetooth (wireless) or AUX IN (wired) sound
sources. The speaker is in Bluetooth mode unless an
audio cable is connected the the AUX IN jack. The
blue LED will blink quickly when pairing and will
remain on when connected in Bluetooth mode.
If you connect a device to the AUX IN jack, the
speaker system will switch to AUX IN mode. The
blue LED will immediately change to green.
Playing from a Bluetooth device
1 Turn on your speaker system and Bluetooth
device. Make sure that your speaker system and
your Bluetooth device are paired.
2 On the Bluetooth device, select the content you
want to play, then press the play button.
3 Use the controls on the Bluetooth device to
control playback.
Troubleshooting
Specifications
Specifications are subject to change without notice.
Note
The auto connect feature may not work with some Bluetooth
devices. If a device does not automatically reconnect, you need to
select your speaker system on your Bluetooth device. Follow the
instructions in “Pairing with a Bluetooth device
” on page 5.
Notes
• If your speaker system is paired to a phone, the
audio pauses when you make or received a call.
• If the system has no sound output, make sure
that the volume level of your Bluetooth device is
not set too low or muted.
Problem Solution
No power
• Make sure that the power cord is securely and correctly
connected.
• Make sure that the power outlet is working. Test the outlet by
plugging a device, such as a lamp, into it.
No sound or low
volume in
Bluetooth mode
• Turn up the volume on your speaker system.
• Turn up the volume on your Bluetooth device.
• Make sure that your Bluetooth device is not muted.
No sound or low
volume in AUX IN
mode
• Make sure that the 3.5mm stereo audio cable is NOT
connected. See “Connecting a device using an audio cable
” on
page 5.
• Turn up the volume on your speaker system.
• Turn up the volume on your audio device.
• Make sure that the connected audio device is not muted.
Bluetooth
connection cannot
be established
• Shorten the distance between your Bluetooth device and your
speaker system.
• Turn off your device, then turn it on again to clear the device
name. Make the connection again. See “Pairing with a
Bluetooth device” on page 5.
• Make sure that your speaker system and Bluetooth device are
both in pairing mode.
• Make sure that your Bluetooth device supports the Bluetooth
3.0 + EDR A2DP protocol.
• Make sure that your Bluetooth device is not connected to any
other device.
• Make sure that you have selected Insignia NS-PSB4521 on
your Bluetooth device.
• Make sure that the AUX cable is disconnected.
My speaker
system and my
Bluetooth device
keep unpairing
• Shorten the distance between your Bluetooth device and your
speaker system.
• If battery charge level on your Bluetooth device is low,
recharge the battery.
Model NS-PSB4521
Type 2.1 Bluetooth Desktop Speaker System
Drivers 5.25 in. subwoofer (1)
3 in. full-range drivers (2)
Bluetooth support Bluetooth 3.0 + EDR A2DP
Input terminal AUX IN
AC adapter AC 120 60 Hz
Dimensions
(H x W × D)
Subwoofer:
8.7 × 8.7 × 9.8 in.
(22 × 22 × 25 cm)
Right satellite:
6.5 × 3.7 × 4.3 in.
(16.5 × 9.5 × 10.8 cm)
Left satellite:
6.5 × 3.7 × 3.9 in.
(16.5 × 9.5 × 10 cm)
Weight 7.3 lbs (3.3 kg)
Cables
• 5 ft. (1.5 m) power cord (permanently attached)
• 5 ft. (1.5 m) RCA cable (permanently attached)
• 5 ft. (1.5 m) DIN cable (permanently attached)
• 5 ft. (1.5 m) 3.5mm stereo audio cable (male to male connectors)
NS-PSB4521_NS-PSB4521-C_14-0387_MAN_V4_ENG.book Page 6 Wednesday, July 2, 2014 8:07 AM