JBL CS60.2 Car Amplifier User Manual


 
Declaration of Conformity
We, Harman Consumer Group International
2
, route de Tours
72500 Chateau du Loir
F
rance
d
eclare in own responsibility that the products
described in this owner’s manual are in compliance
w
ith technical standards:
EN 55013:2001 + A1:2003
EN 55020:2002 + A1:2003
K
laus Lebherz
Harman Consumer Group
International
C
hateau du Loir, France 7/05
JBL Consumer Products
250 Crossways Park Drive
Woodbury, NY 11797 USA
© 2005 Harman International
Industries, Incorporated. All rights reserved.
JBL is a trademark of Harman International
Industries, Incorporated, registered in the
United States and/or other countries.
Part No. CSAMPOM7/05
CS300.1
• 200W RMS x 1 channel at 4 ohms and 1% THD + N
• Signal-to-noise ratio: 100dBA (reference 1W into 4 ohms)
• 300W RMS x 1 channel at 2 ohms, 14.4V supply and 1% THD + N
• Dynamic power: 460W at 2 ohms
• Effective damping factor: 6.395 at 4 ohms
• Frequency response: 10Hz – 300Hz (–3dB)
• Maximum input signal: 6V
• Maximum sensitivity: 100mV
• Output regulation: –0.07dB at 4 ohms
• Dimensions (L x W x H): 12-11/16" x 10-1/4" x 2-3/16"
• Fuses: 20A x 2
CS60.4
• 60W RMS x 4 channels at 4 ohms and 1% THD + N
• Signal-to-noise ratio: 86dBA (reference 1W into 4 ohms)
• 80W RMS x 4 channels at 2 ohms, 14.4V supply and 1% THD + N
• 160W RMS x 2 channels at 4 ohms, 14.4V supply and 1% THD + N
• Dynamic power: 145W at 2 ohms
• Effective damping factor: 6.395 at 4 ohms
• Frequency response: 10Hz – 27kHz (–3dB)
• Maximum input signal: 6V
• Maximum sensitivity: 100mV
• Output regulation: –0.03dB at 4 ohms
• Dimensions (L x W x H): 13-1/4" x 10-1/4" x 2-3/16"
• Fuses: 25A x 2
CS60.2
• 60W RMS x 2 channels at 4 ohms and 1% THD + N
• Signal-to-noise ratio: 86dBA (reference 1W into 4 ohms)
• 80W RMS x 2 channels at 2 ohms, 14.4V supply and 1% THD + N
• 160W RMS x 1 channel at 4 ohms, 14.4V supply and 1% THD + N
• Dynamic power: 160W at 2 ohms
• Effective damping factor: 6.395 at 4 ohms
• Frequency response: 10Hz – 27kHz (–3dB)
• Maximum input signal: 6V
• Maximum sensitivity: 100mV
• Output regulation: –0.03dB at 4 ohms
• Dimensions (L x W x H): 8-7/8" x 10-1/4" x 2-1/4"
• Fuses: 25A x 1
SPECIFICATIONS
www.jbl.com
This product is intended for mobile applications without connection to the
110/230 volts mains.
Features, specifications and appearance are subject to change without notice.