Filter
Top Products
3
10
Carrying Case
Front Panel
4. Keep the detachable front panel in the protective case provided.
2. Grip the release section and pull the front panel forward.
- Be careful not to grip the front panel display too tightly or to drop the panel.
3. Close the inner cover.
- After removing the front panel, be sure to close the inner cover to prevent dirt,
dust or other foreign matter from entering the CD slot.
Installing and Removing the Detachable Face
Inner Cover
Release section
Front Panel
To Install / attach the faceplate:
Place the detachable face place onto
the radio one side at a time so that the
grooved edge of the face plate lines up
directly with the connecting piece on
the radio. The face plate should fit easily
inside the plastic trim. When the face
plate is securely in place, a distinct
“click” will be heard, indicating that it is
locked correctly in place.
To remove the face plate:
1. Press Release button, then the front panel will open (fold down).
Close Up of Side View
8
.
D
I
S
9.
A
.
P
S
7.SCN
4x45Watts
0. LD
MUT
6
MARINE
Release button
1. Manual/Seek tuning buttons (15): Press this button quickly to activate the Seek
mode. The Seek mode will automatically seek up or down the wave band and stop at
the next station of sufficient signal strength. Press and hold tuning buttons for 2
seconds to enter manual tuning mode. The unit will revert back to Seek mode after
10 seconds without use.
2. Manual Station store: Select the desired band and tune to a radio station to be
memorized. Choose the preset button memory location1-6 into which the station is
to be stored and press and hold that preset button for 2 seconds.
The station will now be entered into the preset memory. 6 stations can be memorized
on each of the FM1, FM2, FM3, AM1, AM2.
3. A.PS - Auto store function (18)
Press and hold button (18) for approximately 2 seconds until you hear a beep which
confirms the memory function is engaged. The unit will "SEARCH" for six strong
stations and automatically store them on buttons 1 - 6.
You can override the preset station on any button by manually setting a new frequency.
4. Scan (16)
In Radio mode, press the SCAN (16) button to scan strong stations for previewing.
At the desired station press the "SCAN (16)" button again to stop scanning.
5. Program Memory Scan
Momentarily press A.PS and the unit will scan for stored stations.
Momentarily press it again to stop scanning.
Station Tuning
4
2
5
13
3
6
1
7
8
9
10
11
12
14
15
17
18
16
8
.D
IS
9.
A
.PS
PWR
2 INT
3 RPT
4 RDM
1
5
MODE
7.SCN
FLIP DOWN / COMPACT DISC PLAYER HI - POWER 4x45Watts
MR-17
0. LD
MUT
6
SH.
SR
BD/FN
MARINE
EST.JBL(MR-17)-061205-I/M