Filter
Top Products
POWER Amplifiers
5
Ground Terminal (GND)
Make the ground lead as short as possible, leaving enough length to complete
the installation and to allow for any service that may be needed at a later date.
To ensure a good ground, scrape away any paint or undercoating to expose
bare metal. Use a "ring" terminal of the proper gauge and an "outside star
washer" (between the chassis and ring terminal) when making your ground
connection. Although you’ve scraped away the paint to expose bare metal, the
outside star washer will help to "bite into" the chassis for a tight, secure
ground.
Replacement Fuse Requirements (FUSE)
Model Quantity Amps Type
400 1 25 ATO
760 2 20 ATO
880 2 30 ATO
900 2 30 ATO
920 2 30 ATO
1050 4 25 ATO
Drill hole in chassis sheet metal.