Filter
Top Products
14
A400HLX, A600HLX
®
Specifications
A400HLX/A600HLX 4-Channel Amplifiers
Frequency Response ....................................................................................... 20 Hz-20 kHz ± 0.5 dB
Signal to Noise Ratio @ Rated Power ....................................................................................>100 dB
Channel Separation @ Ref. Power............................................................................... >65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms ..................................................................................... <0.8%
Speaker Impedance .............................................................................................................. 2-8 ohms
Input Impedance ................................................................................................................. 47 k ohms
Bass Boost Center Frequency .....................................................................................................45Hz
Crossover....................................................................................................12 dB/octave, Butterworth
Power Requirement .................................................................. 14.4 VDC (10.8-15.6 VDC allowable)
A400HLX
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) ........................................................................ 50 Watts per channel RMS, < 0.5% THD
(2 ohms) ........................................................................ 75 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ......................................................... 150 Watts per channel RMS, < 0.8% THD
Dimensions .................................................................3" x 11.125" x 10" (76mm x 283mm x 254mm)
A600HLX
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms) .............................................................. Front: 50 Watts per channel RMS, < 0.5% THD
Rear: 100 Watts per channel RMS, < 0.5% THD
(2 ohms) .............................................................. Front: 75 Watts per channel RMS, < 0.8% THD
Rear: 150 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged ............................................... Front: 150 Watts per channel RMS, < 0.8% THD
Rear: 300 Watts per channel RMS, < 0.8% THD
Dimensions .................................................................3" x 11.125" x 13" (76mm x 283mm x 330mm)
Specifications subject to change without notice.
REC002_A4n600HLX_E 1/9/02, 4:13 PM14