Jensen A400HLX Car Amplifier User Manual


 
6
A400HLX, A600HLX
®
Inputs, RCA Output, Remote Level Control
Input Wiring
Low Level Input (RCA Input)
Low level (RCA) input is preferred for best
performance. Most trunk/hatchback installations
will require a 15-20 foot RCA cable. While pick-
up trucks and under-seat mounting will require
a 6-12 foot RCA cable.
Connect an RCA cable
from your receiver to the RCA input on your
amplifier.
High Level Input
High level input should be used when an RCA
output is not available from the receiver.
Connect the speaker outputs from the receiver
to the high level input connector.
Important
Only connect the low (RCA) or high level input.
Do not use both at the same time.
LR
RR
LR
RR
INPUT
OUTPUT
LF
RF
LF
RF
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
LR
RR
LR
RR
INPUT
OUTPUT
LF
RF
LF
RF
REAR
HI-LEVEL
FRONT
HI-LEVEL
INPUT
OUTPUT
Splice
(as necessary)
Hi Level
Low Level
Hi Level
Radio
A400HLX
A600HLX
LR
RR
LR
RR
INPUT
OUTPUT
LF
RF
LF
RF
REAR
HI-LEVEL
FRONT
HI-LEVEL
REMOTE
BASS
INPUT
OUTPUT
White = Left (+)
White/Black = Left ()
Black (ground)
Gray = Right (+)
Gray/Black = Right ()
REC002_A4n600HLX_E 1/9/02, 4:13 PM6