Jensen MZ7TFT Car Video System User Manual


 
MZ7TFT
8
Care and Maintenance
Do not remove the rear panel of this product. If in need of service, please
call a qualified technician.
Keep away from strong light while using this product so as to obtain the
clearest and the most colorful picture.
Avoid heavy impact, do not drop.
Do not use chemical solutions to clean this unit. Please wipe with a clean
soft cloth to keep brightness of the surface.
Do not expose this product to direct sunlight, heat or humid conditions.
Specifications
Video input: 2 channels CVBS
Audio input: 2 channels stereo
Audio output: Infrared modulation
Monitor specification: 7 inch color TFT LCD
Pixel: RGB 234 x 1440
Power: 10.8~16V, Negative grounding
Max. current: 1A
Standby current: <
5mA
Video input amplitude: 1v-pp, 75 ohm load
Audio input amplitude: 2Vrms max
Operating temperature: -10°C~+60°C
IR carrier frequency:
A Channel: 2.3/2.8MHz±100ppm
B Channel: 3.2/3.8MHz±100ppm
IR wavelength: 850nm
Modulation mode: Frequency modulation (FM)
Range of IR emitting:
Frontage: 5m
Left and right / up and down (30º): 2m