4
Wiring Diagram
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or
have the installation handled by an experienced technician.
When wiring is complete, reconnect the battery negative terminal.
Need Help?
For technical assistance, call the
Jensen customer support line at
1-800-323-4815.
IMPORTANT!
The pink parking
wire MUST be
connected to the
switched side of the
parking break circuit
(the part that
becomes grounded
when the brake is
applied).
(Yellow)
(Blue)
(Yellow)
Purple
Purple/Black
Stripe
Gray/Black
Stripe
White/Black
Stripe
White
Green/Black Green
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right
Speaker
(Rear)
Blue
Red
Front Line Out
R (Red)
L (White)
Black
Auto Antenna Control
Connect to antenna control lead and
power supply of antenna amplifier.
Tape bare end of wire if not used.
Accessory/Ignition
Connect to existing radio wire
or radio fuse.
Rear Line Out
R (Red)
L (White)
Gray
Yellow
Black
Subwoofer Out
Parking
(Pink)
Camera In
Video Out
Fuse (15A)
Camera (Green/White)
Steering Wheel Control (SWC)
Chassis Ground
Battery
)
-
()
(
+
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
Connect the yellow wire to the
battery or 12 volt power source that
is always live. This wire MUST be
connected for the radio to work.
Antenna
(Requires PAC SWI-PS Interface
Adapter, Sold Separately)
+
FILTER
BOX
Gray
Stripe
FRONT
REAR
External PowerAmplifier