JL Audio SB-F-RTRKCTR/12W3v2-D2 Car Speaker User Manual


  Open as PDF
of 4
 
➔
Continued on Page 4 ➔
➔➔
➔➔
STEP 17: A) Line up small angle bracket to front
middle of OEM inner(cut) console and mark hole.
STEP 17: B) Using an 1/8” drill bit, drill
marked hole.
Cont.
From
Page 2
➔
➔
STEP 17: C) Mount the small angle bracket using
the suppied black rivet and small washer.
STEP 18: Place inner (cut) OEM console inside
outter OEM console / top of Stealthbox.
Drill six holes using 1/8” drill bit. Using the OEM
inner console’s lid mounting holes as guides.
STEP 19: Using the six(out of seven) T-15 Torx
bolts that was removed in STEP 10, mount lid.
STEP 20: With lid mounted, drill “7th” hole
using a 1/8” drill bit.
Don’t forget to bolt down lid strap with the
7th t-15 Torx screw.
SB-F-RTEKCTR/12W3v2-D2, JL AUDIO, Inc 2002
Sheet SKU#011159 Revision 11/18/2003Page 3
www.jlaudio.com
➔
➔
STEP 16: Use masking tape to mark cutting
template.
IMPORTANT!!!!
Please read STEP 16 A and
B before cutting.
Us
ing a suitable saw to cut OEM inner
console.
IMPORTANT!!!!
A) Cut 1 1/2” under lip.Where there is no
ledge/reinforcement
IMPORTANT!!!!
B) Where there is a ledge/reinforcement cut
1 5/16” under the ledge/reinforcement.
 previous