JL Audio SB-J-GCHER3/10W1v2/GA Car Speaker User Manual


  Open as PDF
of 5
 
Continued on Next Page
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
STEP 23
Place the right rear door’s sill plate back into place, from
STEP 13.
STEP 22
Wire and mount the woofer back into the Stealthbox®.
STEP 21
Place the Stealthbox® into the mounting area. Guide the
exposed socket cup set screw through the hole on the back
side of the Stealthbox®.
Place a supplied fender washer, flat washer, lock washer and
hex nut onto the socket cup set screw that is exposed inside
the Stealthbox®.
STEP 20
Run speaker wire from the amplifier location to the
Stealthbox® location.
Page 4 • JL Audio, Inc 2007
STEP 25
Secure the tailgate’s bottom sill plate back into place, from
STEP 4.
STEP 27
Secure the d-pillar cover back into place, from STEP 12.
STEP 26
Place the false floor back into the vehicle, from STEP 5.
STEP 24
Place the flooring back into the vehicle from STEPS 5&6,
and secure.
 previous