Filter
Top Products
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
SB-J-GCHER3/10W1v2_INSTR_SKU#011235
CONGRATULATIONS
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
STEP 30
With a Phillips head screw driver, secure the screw that was
removed in STEP 9.
STEP 29
Secure the c-pillar cover back into place.
With a Phillips head screw driver, secure the screw and the
little cover that was removed in STEP 7.
STEP 28
With a Phillips head screw driver, secure the screw that was
remove in STEP 9.
The D-ring is not to be remounted.
Page 5 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011235 6-13-200
JLA-SKU#011235 6-13-200
7
7 • Printed in USA • ©2007 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479
#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.
For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
INCLUDED HARDWARE
(1)
(1)
3/8-inch-16 x 1-inch Hex Tap Bolt
3/8-inch-16 x 1-inch Hex Tap Bolt
(1)
(1)
3/8-inch x 1-1/4-inch Fender Washer
3/8-inch x 1-1/4-inch Fender Washer
(2)
(2)
Rod Coupling Nut (1) 3/8-inch-16 Hex Nut
Rod Coupling Nut (1) 3/8-inch-16 Hex Nut
(2)
(2)
3/8-inch Lock Washer (2) 3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw
3/8-inch Lock Washer (2) 3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw
(2)
(2)
3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw
3/8-inch-16 x 2-1/4-inch Socket Cup Set Screw
SPECIFICATIONS
Enclosure Type:
Acoustic Suspension (sealed)
Acoustic Suspension (sealed)
Driver Type:
10W1v2
10W1v2
Nominal Impedance:
4 ohms mono
4 ohms mono
Continuous Power Handling:
150 Watts
150 Watts
P O W E R R E C O M M E N D A T I O N
POWER RECOMMENDATION
JL Audio recommends using a high quality amplifier such as the JL Audio A2150.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the A2150 when
being used to power your Stealthbox
®
.
The JL Audio A2150 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
3.5-inch / Dash
3.5-inch / Dash
Fits JL Audio Models:
TR350-CXi
TR350-CXi
Front Speaker Size / Location:
6-inch x 9-inch / Front Doors
6-inch x 9-inch / Front Doors
Fits JL Audio Models:
*TR690-TXi & *VR690-CXi
*TR690-TXi & *VR690-CXi
Rear Speaker Size / Location:
6.5-inch / Rear Door
6.5-inch / Rear Door
Fits JL Audio Models:
TR650-CXi, VR650-CXi, *XR650-CXi & *C5-650x
TR650-CXi, VR650-CXi, *XR650-CXi & *C5-650x
*Spacers required for proper speaker installation.
*Spacers required for proper speaker installation.