Filter
Top Products
SB-N-FRNTCC/10W1v2_INSTR_SKU#011229
SB-N-FRNTCC/10W1v2_INSTR_SKU#011229
STEALTHBOX WALL
THREADED INSERT
VEHICLE SHEET METAL
FENDER WASHER
SOCKET CUP SET SCREW
LOCK WASHER
FLAT WASHER
HEX NUT
CONGRATULATIONS
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
STEP 15
Secure the passenger’s side storage bin.
STEP 14
From under the vehicle, place a supplied fender washer,
flat washer, lock washer and then hex nut onto the socket
cup set screw and secure.
Note: For added protection it is recommended that
you apply a bead of silicone between the vehicle and
the fender washer. After the bolt assembly is tightly
secured, it is also recommended that vehicle under-
coating material is applied to the exposed assembly
STEP 13
Place a supplied 3/8-inch lock washer and flat washer onto
the 3/8-inch bolt.
Place the supplied 6mm flat washer onto the 6mm bolt.
Using a socket, fully secure the Z-bracket to the truck’s
mounting point and on top of the Stealthbox®.
Page 3 • JL Audio, Inc 2006
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011229-05-12-200
JLA-SKU#011229-05-12-200
7
7 • Printed in USA • ©2005 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
INCLUDED HARDWARE
(2)
(2)
Black Rubber Tapered Squares
Black Rubber Tapered Squares
(1)
(1)
3/8-inch -16 x 1 1/2-inch Bolt
3/8-inch -16 x 1 1/2-inch Bolt
(2)
(2)
3/8-inch Split Lock Washer
3/8-inch Split Lock Washer
(1)
(1)
3/8-inch x 1 1/4-inch Fender Washer
3/8-inch x 1 1/4-inch Fender Washer
(2)
(2)
3/8-inch Flat Washer
3/8-inch Flat Washer
(1)
(1)
Z-Bracket
Z-Bracket
(1)
(1)
6mm x16mm Bolt
6mm x16mm Bolt
(1)
(1)
3-inch x 3-inch Wax Square
3-inch x 3-inch Wax Square
(1) 3/8-inch -16 Hex Nut
(1) 3/8-inch -16 Hex Nut
(1)
(1)
3/8-inch -16 x 2 1/4-inch Socket Cup Set Screw
3/8-inch -16 x 2 1/4-inch Socket Cup Set Screw
(1)
(1)
6mm Flat Washer
6mm Flat Washer
SPECIFICATIONS
Enclosure Type:
Acoustic Suspension (sealed)
Acoustic Suspension (sealed)
Driver Type:
10W1v2-4
10W1v2-4
Nominal Impedance:
4 ohms mono
4 ohms mono
Continuous Power Handling:
150 Watts
150 Watts
POWER RECOMMENDATION
JL Audio recommends using a high quality amplifier such as the JL Audio A2150.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the A2150 when
being used to power your Stealthbox
®
.
The JL Audio A2150 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
6.5-inch / Front Doors
6.5-inch / Front Doors
Fits JL Audio Models:
TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,
TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,
C5-650x, C5-650 & ZR650-CSi
C5-650x, C5-650 & ZR650-CSi
Rear Speaker Size / Location:
6.5-inch / Rear Doors
6.5-inch / Rear Doors
Fits JL Audio Models:
TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,
TR650-CXi, TR650-CSi, VR650-CXi, VR650-CSi, XR650-CXi, XR650-CSi,
C5-650x, C5-650 & ZR650-CSi
C5-650x, C5-650 & ZR650-CSi