Filter
Top Products
➔
➔
➔
➔
➔
Stealthbox
®
INSTALLATION GUIDE
SB-T-SEQ/10W3v2-D2, JL AUDIO, Inc 2002
Sheet SKU#011111 Revision 10/30/02Page 1
for the
SB-T-SEQ/10W3
(Fits 2001 and Up Toyota Sequoia)
This Stealthbox is a product
which requires professional
installation skills and tools.
Please read this installation guide
thoroughly before beginning the
project. It will guide you step by
step through the installation. Several
of the steps in this process may
require two people to accomplish.
It is absolutely vital that the
enclosure be properly mounted to
the vehicle according to these
instructions. Failure to mount the
enclosure properly presents two
problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused
by the force exerted by the
woofer(s) and 2) A loose enclosure
presents a serious safety hazard in
the event of a collision or sudden
deceleration.
Please enjoy your JL Audio
Stealthbox responsibly.
STEP 1:
Remove the driver’s side rear
storage area cover.
STEP 2:
Remove the driver’s side rear panel.
STEP 3:
Grind off the plastic tabs which hold
the pocket to the panel.
STEP 4:
Remove the pocket from the panel.
STEP 5:
Create a notch in the side panel as
shown in the picture.
STEP 6:
Create a second notch in the side
panel as shown in the picture.
START
HERE
Continued on Page 2 ➔
www.jlaudio.com
➔
➔
➔
➔