JVC 0302KKSMDTJEIN Car Stereo System User Manual


 
13
ENGLISH
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from the
current source (another FM station, tape or other
connected components).
TA Standby Reception will not work if you are listening
to an AM station.
Press TP PTY to activate TA Standby Reception.
7 When the current source is FM, the TP
indicator either lights up or flashes.
If the TP indicator lights up, TA Standby
Reception is activated.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically tunes in
to the station. The volume changes to the
preset TA volume level (see page 17) and
the traffic announcement can be heard.
If the TP indicator flashes, TA Standby
Reception is not yet activated since the
station being received does not provide the
signals used for TA Standby Reception.
To activate TA Standby Reception, you need
to tune in to another station providing these
signals.
Press ¢ or 4 to search for such
a station.
When a station providing these signals is
tuned in, the TP indicator stops flashing and
remains lit. Now TA Standby Reception is
activated.
7 When the current source is other than FM,
the TP indicator lights up.
If a station starts broadcasting a traffic
announcement, “TRAFFIC” appears on the
display, and this unit automatically changes
the source and tunes in to the station.
To deactivate the TA Standby Reception, press
TP PTY again.
Programme 1
broadcasting
on frequency D
Programme 1
broadcasting
on frequency C
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency E
The same programme can be received on
different frequencies.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 26.)
2
Select “AF-REG (alternative
frequency/regionalization
reception)” if not shown on the
display.
3
Select the desired mode – “AF,”
“AF REG” or “OFF.”
4
Finish the setting.
TP
PTY
EN12_18KSFX925R[EE]f.pm5 4/03/2002, 10:38 AM13