JVC 0302KKSMDTJEIN Car Stereo System User Manual


 
ENGLISH
35
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see page 34.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Select the number (1 – 6) for the
preset DAB service you want.
DAB
DAB 1 DAB 2 DAB 3
(D 1) (D 2) (D 3)
EQ
FM/AMDAB
What you can do more with DAB
Tracing the same program automatically
(Alternative Reception)
You can keep listening to the same program.
While receiving a DAB service:
When driving in an area where a DAB service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same program as the FM
RDS station, this unit automatically tunes in to
the DAB service.
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
inconveniently. This change in the volume level results
from unequal audio injection levels at broadcaster
site, but not from the malfunction of this unit.
To use the Alternative Reception – DAB AF
When shipped from the factory, Alternative
Reception is activated.
See also “Changing the general settings (PSM)”
on page 25.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “DAB AF”
(alternative frequency).
3 Turn the control dial to select the desired mode.
• AF ON: Traces the program among DAB
services and FM RDS stations
— Alternative Reception. The AF
indicator lights up on the display
(see page 12).
• AF OFF:Deactivates Alternative Reception.
Note:
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 12) is also activated automatically.
On the other hand, Network-Tracking Reception
cannot be deactivated without deactivating
Alternative Reception.
4 Press SEL (select) to finish the setting.
EN32_35KSFX925R[EE]f.pm5 4/03/2002, 10:42 AM35