Filter
Top Products
8
ENGLISH
Setting the clock
You can also set the clock system to either 24
hours or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM item appears on the display.
(PSM: see page 32.)
2
Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
5
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
• During tuner operation:
Note:
For the indication change during RDS operation,
see page 17.
• During disc operation:
Notes:
• While playing a conventional CD, “NO NAME”
appears for the disc title/performer and the track
title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 22 and 26.
• During power off:
The power turns on and the clock time is shown
for 5 seconds, then the power turns off.
12
12
12
Frequency
Clock
Elapsed
playing time
Clock
Disc title /
performer
Track title
EN07-08_KD-SC945[U]f.p65 1/13/03, 12:30 PM8