JVC GET0665-001A Car Stereo System User Manual


 
12 ENGLISH
If you have turned off the power (without
detaching the USB device)...
Pressing
SOURCE
turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
“NO USB” appears. Press
SOURCE
to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. ( 10,
11)
Listening to the USB device
This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player,
etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input terminal. For details of the
operations, 22.
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Cautions:
• Avoid using the USB device if it might hinder
your safety driving.
• Do not pull out and attach the USB device
repeatedly while “READING” is shown on the
display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files
depending on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB
input terminal of the unit.
• Make sure all important data has been backed
up to avoid losing the data.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• Some USB devices may not work immediately
after attaching USB device or turn on the
power.
• For more details about USB operations,
35, 36.
USB input terminal USB memory
EN12-23_KW-XR610[J]3.indd 12EN12-23_KW-XR610[J]3.indd 12 1/15/10 9:39:14 AM1/15/10 9:39:14 AM