JVC GET0665-001A Car Stereo System User Manual


 
39ENGLISH
Symptom Remedy/Cause
USB device playback
• “CANNOT PLAY” flashes on
the display.
• “NO USB” appears on the
display.
• The unit cannot detect the
USB device.
• Attach a USB device that contains tracks encoded in an
appropriate format.
• Reattach the USB device again.
While playing a track, sound
is sometimes interrupted.
The MP3/WMA tracks have not been properly copied into
the USB device.
Copy MP3/WMA tracks again into the USB device, and try
again.
Correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (
9)
Bluetooth *
2
Bluetooth device does not
detect the unit.
The unit can be connected with one Bluetooth mobile
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the
Bluetooth device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select “OPEN” on the unit to connect the
device. (
13)
The unit does not make
pairing with the Bluetooth
device.
• Enter the same PIN code for both the unit and target
device.
• Select the device name from “SPECIAL,” then try to
connect again. (
14)
• Try to pair/connect from the Bluetooth device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth
mobile phone.
• Move the car to a place where you can get a better signal
reception.
The connected audio device
cannot be controlled.
Check whether the connected audio device supports
AVRCP (Audio/Video Remote Control Profile).
The sound is interrupted or
skipped during playback of a
Bluetooth audio device.
• Reduce the distance between the unit and the Bluetooth
audio device.
• Disconnect the device connected for “BT-PHONE.”
• Turn off, then turn on the unit.
• Connect the Bluetooth audio device again, when the
sound is not yet restored.
*
2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
EN34-43_KW-XR610[J]3.indd 39EN34-43_KW-XR610[J]3.indd 39 1/15/10 9:43:12 AM1/15/10 9:43:12 AM