Filter
Top Products
24
ENGLISH
To adjust fader and balance
—Fad/Bal
Adjust the fader—speaker output balance
between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
Adjust the balance—speaker output balance
between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
To adjust subwoofer output—
Subwoofer
Select an appropriate cutoff frequency level
according to the subwoofer connected.
• 55Hz / 85Hz / 115Hz
• Frequencies higher than the selected level
are cut off to the subwoofer.
Adjust the subwoofer output level.
• 0 (min.) to 8 (max.)
Setting the basic sound
selection menu—SEL
You can adjust the sound characteristics to your
preference.
1 Enter the SEL menu (see page
5).
2 Select a setting item—“Fad/Bal,”
“Subwoofer,” or “VolAdjust.”
Ex.: When “Fad/Bal” is selected
When selecting “Fad/Bal” and
“Subwoofer,” press
to
enter the selected menu.
3 Adjust the selected setting item.
• To adjust other SEL settings, press
BACK.
4 Finish the procedure.
EN21-26_KD-AR7500[J]7.indd 24EN21-26_KD-AR7500[J]7.indd 24 05.2.10 6:57:43 PM05.2.10 6:57:43 PM