JVC KD-DV5100 Car Stereo System User Manual


 
55
ENGLISH
To be continued....
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Causes Remedies
General
Sound cannot be heard
from the speakers.
The volume level is set to
the minimum level.
Adjust it to the optimum
level.
Connections are incorrect. Check the cords and
connections.
The receiver does not
work at all.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Reset the receiver
(see page 2).
Remote controller does not
work.
Dual Zone is activated
(see page 32).
While Dual Zone is
activated, remote controller
only functions for operating
the DVD/CD player.
FM/AM
SSM automatic presetting
does not work.
Signals are too weak. Store stations manually.
Static noise while listening
to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Disc playback
Disc cannot be played
back.
Disc is inserted upside
down.
Insert the disc correctly.
• CD-R/CD-RW or DVD-R/
DVD-RW cannot be played
back.
Tracks on the CD-R/
CD-RW or DVD-R/
DVD-RW cannot be
skipped.
CD-R/CD-RW or DVD-R/
DVD-RW is not finalized.
Insert a finalized CD-R/
CD-RW or DVD-R/
DVD-RW.
Finalize the
CD-R/CD-RW
or DVD-R/DVD-RW
with
the component which you
used for recording.
Disc cannot be recognized. The DVD/CD player may
have functioned incorrectly.
Eject the disc forcibly
(see page 2).
“NO DISC” appears on the
display.
Disc is inserted incorrectly. Insert the disc correctly.
EN50-59_KD-ADV6160[J]f.indd 55EN50-59_KD-ADV6160[J]f.indd 55 12/16/04 10:19:18 PM12/16/04 10:19:18 PM