Filter
Top Products
19
ENGLISH
To stop play and eject the disc
Press 0.
Playback stops and the control panel moves
down.
The disc automatically ejects from the loading
slot.
To change the display information
While playing back an MP3/WMA file, you can
change the disc information shown on the
display.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes to show the
following:
• When “TAG DISPLAY” is set to “TAG
DISP ON” (initial setting: see page 30)
* If ID3 tags are not recorded, folder name and file
name appear. In this case, the TAG indicator will
not light up on the display.
• When “TAG DISPLAY” is set to “TAG
DISP OFF”
Press ¢ briefly while
playing, to skip ahead to the
beginning of the next file.
Each time you press the
button consecutively, the
beginning of the next files is
located and played back.
Notes:
• The display shows up to 12 characters at a time and
scrolls if there are more than 12 characters.
See also “To select the scroll mode—SCROLL
MODE” on page 29.
• When file name is shown, TRACK indicator and
current track number also appear on the lower part
of the display.
Locating a file or a particular
portion on a disc
To fast-forward or reverse the file
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous files
Press 4 briefly while playing, to skip back
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
Press and hold 4 while playing a disc, to
reverse the file.
Press and hold ¢
while playing a disc, to fast-
forward the file.
Album name / performer
(folder name*)
( lights up on the display)
Track title (file name*)
( lights up on the display)
Elapsed playing time and
Current file number
Elapsed playing time and
Current file number
Folder name
( lights up on the display)
File name
( lights up on the display)