Filter
Top Products
24
ENGLISH
Selecting preset sound modes
(iEQ: intelligent equalizer)
You can select a preset sound mode (iEQ:
intelligent equalizer) suitable to the music genre.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1
again.
1
Press MODE to enter the functions
mode.
2
Press EQ (equalizer) while “MODE”
is still on the display.
The last selected sound mode
is called up.
3
Select the sound mode you want.
As you turn the control
dial, the sound modes
change as follows:
FLAT O HARD ROCK O R&B O
POP O JAZZ O DANCE MUSIC O
COUNTRY O REGGAE O CLASSIC O
USER 1 O USER 2 O USER 3 O
(back to the beginning)
Ex.: When you select “HARD ROCK”
To cancel the preset sound mode, select
“FLAT” in step
3
.
Notes:
• You can adjust the preset sound modes temporarily.
However, your temporary adjustments will be reset
when you select another sound mode.
• For details about the preset settings of each sound
mode, see table on page 40.
• For showing the iEQ pattern on the display during
play, select “EQ & LEVEL” or “SILENT” for the
level meter. See also page 28.
When using the remote controller:
Press SOUND repeatedly.
Each time you press the
button, the sound modes
change as follows:
Indication pattern changes
for each sound mode.
SOUND
SOURCE
R
F
U
D
ATT
USER 1,USER 2, USER 3