Filter
Top Products
ENGLISH
41
Symptoms Remedies/Causes
MP3/WMA playback
• “Not Support” appears on the display
and track skips.
Skip to the next track encoded in an appropriate
format or to the next non-copy-protected WMA
track.
• “NO MUSIC” appears on the display. Change the disc that contains MP3/WMA tracks.
• Correct characters are not displayed
(e.g. album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols and special characters (see page 38).
USB memory playback
• Noise is generated. The track played back is not an MP3/WMA track.
Skip to another file. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
• “File Check” keeps flashing on the
display.
• Readout time varies depending on the USB
memory.
• Do not use too many hierarchy and folders.
• Turn off the power then on again.
• “No Files” appears on the display. Attach a USB memory that contains tracks
encoded in an appropriate format.
• “Not Support” appears on the display
and track skips.
The track is unplayable.
• “Read Failed” appears on the display,
then returns to the previous source.
• The attached USB memory may be
malfunctioning, or may not have been
formatted correctly.
The files included in the USB memory are
corrupted.
• Do not pull out or attach the USB memory
repeatedly while “File Check” appears on the
display.
• Correct characters are not displayed
(e.g. album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols and special characters (see page 38).
• While playing a track, sound is
sometimes interrupted.
MP3/WMA tracks have not been properly copied
into the USB memory.
Copy MP3/WMA tracks again into the USB
memory, and try again.
CD changer
• “No Disc” appears on the display.
Insert a disc into the magazine.
• “No Magazine” appears on the
display.
Insert the magazine.
• “Reset 08” appears on the display. Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on
the display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
Continued on next page...
EN36-43KD-G821[EX_EU]2.indd 41EN36-43KD-G821[EX_EU]2.indd 41 9/12/05 4:00:59 pm9/12/05 4:00:59 pm