Filter
Top Products
7
ENGLISH
2-2 Setting the clock
1 Press number button 4 ( ).
“Clock Hr” (hour) appears. Then,
turn the control dial to adjust the
hour.
2 Press ¢
to select “Clock Min”
(minute). Then, turn the control
dial to adjust the minute.
3 Press ¢ to select “24H/12H.”
Then, turn the control dial to select
“24Hours” or “12Hours,” time
display mode.
3 Exit from the setting.
To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
“SMALL” (CD jacket image) graphic*
1
is displayed.
“LARGE” (full display size) graphic*
1
is displayed.
Audio level meter is displayed (see “LevelMeter” on page 20).
Goes back to the initial display pattern.
*
1
You can use your edited file for graphic screen
(see pages 23 – 26).
Depending on a downloaded file, it may take
a longer time to show it on the display.
*
2
The information bar will disappear if no
operation is performed for five seconds.
Radio operations
~
Ÿ
!
Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
*
2
Continued on next page...
EN06-17KD-G821[EX_EU]f.indd 7EN06-17KD-G821[EX_EU]f.indd 7 21/12/05 5:36:32 pm21/12/05 5:36:32 pm