Filter
Top Products
55
ENGLISH
Remedies
This is normal (see page 30).
Wait until the operating
temperature resumes—until
(LOW TEMP.) indicator
goes off.
Insert discs into the
magazine.
Insert discs correctly.
Insert the magazine.
Connect this unit and the
CD changer correctly and
press the reset button of the
CD changer.
Press the reset button of the
CD changer.
Press the reset button on the
control panel. (The clock
setting and preset stations
stored in memory are
erased.) (See page 2.)
Causes
You are trying to download an
animation of many frames.
Temperature in the car
compartment is very low—
(LOW TEMP.) indicator
appears.
No disc is in the magazine.
Discs are inserted upside
down.
No magazine is loaded in the
CD changer.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Symptoms
• Download does not seem to
finish.
• Animation does not move.
•“Movie” category settings in
the PSM do not take effect.
•“No Disc” flashes on the
display.
•“No Magazine” flashes on
the display.
•“Reset 08” flashes on the
display.
•“Reset 01” – “Reset 07”
flashes on the display.
• The CD changer does not
work at all.
CD Changer
Graphics
Available characters
You can use the following characters to assign names to stations, CDs, and external component
(Line Input). (See page 43.)
• These characters can be also used to show other information such as disc title/performer on the
display.
Capital letters
Small letters Numbers and symbols
space
space
space
EN53-57_KD-AR3000LH300[J]f.p65 20/11/03, 4:12 PM55