Filter
Top Products
12
ENGLISH
Setting the channel selection
You can set the channel selection method either to select only the receivable channels in
memory or to select all the channels.
Remember that if you want to select only the receivable channels, you must store the channels
first. To store them, see page 11.
CH
CH
COLOR
BRIGHT
CONTRA
H/P
VOL
H/P
VOL
MODE
SKIP
A.MEMO CALL
VOCAL
R
F
MONI
VCR
1
2
Monitor Remote
Monitor Remote
MODE
CH
CH
H/P
VOL
H/P
VOL
MODE
VIDEO 1
TV
VIDEO 2
1
Select TV as the input source.
Press the MODE button on the monitor or the remote
controller repeatedly to select TV.
2
Set the channel selection to “AUTO” or
“MANUAL.”
Press the AUTO/MANU button on the monitor or the SKIP
button on the remote controller.
Each time you press the button, the channel selection
alternates between “AUTO” and “MANUAL.”
AUTO: Only the receivable channels stored in memory
can be selected. When you change the channel,
channel number and “AUTO” appear on the
screen for a while.
MANUAL: All the channels can be selected. (Channel
coverage: VHF channels 1 to 12, UHF channels
21 to 69)
AUTO/MANU
SKIP
DOWN UP
AUTO/MANU
MODE POWER
KV-M700 color monitor
12
KV-M700 remote controller
AUTO
08
EN09-15.KV-C10[E]f 01.1.17, 10:05 AM12