Filter
Top Products
14 ENGLISH
Making a call
1
]
Enter “HF Menu” screen.
2
]
Select a calling method or make a
setting. (Dialed Calls/ Received Calls/
Missed Calls/ Phonebook/ Dial Number/
Voice/ Settings)
3
If “Dialed Calls/ Received Calls/
Missed Calls/ Phonebook” is selected
in step 2 ...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• “No History Found” appears if there is no
history stored.
• “No Entries Found” or “Send Phonebook
Manually” appears depending on the
“Phonebook Select” settings. (See the
right column.)
If “Dial Number” is selected in step 2 ...
Enter the phone number to dial.
Turn the control dial to select a number
or character (0 – 9,
*
, #, +), press
4
/
¢
to move to the entry position.
Once you finished entering the number,
press the control dial to confirm.
If “Voice” is selected in step 2 ...
Speak the name (registered words) you
want to call when “Waiting Voice [Device
Name]” appears.
• Press and hold to activate voice dial
operation directly if only one phone is
connected.
If two phones are connected, pressing
and holding will enter “Phone list”
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• “Not Support” appears if the connected
phone does not support this feature.
If “Settings” is selected in step 2 ...
Turn the control dial to select an item (see
the following), then press the control dial
to confirm.
The following settings are applicable to
the paired device. If another device is
paired, make the settings again.
•
Phonebook Select
*
In Phone
[Initial] : The unit browses the
phonebook of the connected phone.
In Unit
: The unit browses the phonebook
registered in the unit. (To copy the phonebook
memory, see <Phonebook Trans> on page 18.)
•
If the phonebook contains many numbers, you
can fast search (±10, ±100, ±1 000) through
the phonebook by turning the control dial
quickly.
•
To search through the phonebook, see page 15.
*
Selectable only when the connected phone
supports PBAP.
•
Auto Answer
On
: The unit answers the incoming calls
automatically. /
Off
[Initial] : The unit does not
answer the calls automatically. Press or the
control dial to answer.
Using a Bluetooth mobile phone
EN02-39_KD-A925BT[J]4.indd 14EN02-39_KD-A925BT[J]4.indd 14 1/28/11 9:11:06 AM1/28/11 9:11:06 AM