JVC KD-G440 Car Stereo System User Manual


 
17
ENGLISH
Remote controller — RM-RK50
KD-G447 can be remotely controlled as instructed here
(with an optionally purchased remote controller). We
recommend that you use remote controller RM-RK50
with your unit.
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.
Warning:
Do not install any battery other than CR2025 or
its equivalent; otherwise, it may explode.
Do not leave the remote controller in a place
(such as the dashboard) exposed to direct
sunlight for a long time; otherwise, it may
explode.
Store the battery in a place where children
cannot reach to avoid the risk of accidents.
To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
– Do not leave the battery with other metallic
materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate when
throwing away or saving it.
Main elements and features
1 (standby/on/attenuator) button
Turns the power on if pressed briefly or
attenuates the sound when the power is on.
Turns the power off if pressed and held.
2 5 U (up) / D (down) buttons
Changes the FM/AM bands with 5 U.
Changes the preset stations with D .
Changes the folder of the MP3/WMA.
3 VOL – / VOL + buttons
Adjusts the volume level.
4 SOUND button
Selects the sound mode (iEQ: intelligent
equalizer).
5 SOURCE button
Selects the source.
6 2 R (reverse) / F (forward) 3 buttons
Searches for stations if pressed briefly.
Fast-forwards or reverses the track if pressed and
held.
Changes the track if pressed briefly.
EN08-17_KD-G447[EE]_3.indd 17EN08-17_KD-G447[EE]_3.indd 17 10/29/07 5:09:14 PM10/29/07 5:09:14 PM