Filter
Top Products
19ENGLISH
Menu item
Selectable setting, [Initial: Underlined]
IPOD SWITCH *
8
HEAD MODE
:
Controls iPod playback through the unit. /
IPOD MODE
:
Controls
iPod playback through the iPod/iPhone. /
EXT MODE
:
The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit. The display always show “EXT MODE.”
SRC SELECT
AM *
9
ON
/
OFF
:
Enable or disable “AM” in source selection.
F-AUX *
9
ON
/
OFF
:
Enable or disable “F-AUX” in source selection.
R-AUX *
9
ON
/
OFF
:
Enable or disable “R-AUX” in source selection. /
BT ADAPTER
:
Selects if
the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 12)
The source name changed to “BT AUDIO.”
*
8
Displayed only when “USB-IPOD” is selected as the source.
*
9
Displayed only when any source other than “AM/F-AUX/R-AUX/BT AUDIO” is selected separately.
Symptom Remedy/Cause
General
Sound cannot be heard from the
speakers.
Adjust the volume to the optimum level. / Make sure the unit is not
muted/paused. (page 6) / Check the cords and connections.
“MISWIRING CHK WIRING THEN RESET
UNIT” / “WARNING CHK WIRING THEN
RESET UNIT” appears on the display and
no operations can be done.
Check to be sure the terminals of the speaker leads are covered
with insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC car audio
dealer or a company supplying kits.
The unit does not work at all. Reset the unit. (page 3)
“F-AUX” or “R-AUX” cannot be selected. Check the <SRC SELECT>
=
<F-AUX / R-AUX> setting. (See
above.)
Sound is sometimes interrupted while
listening to an external component
connected to the auxiliary input jack.
Check to be sure the recommended stereo mini plug is used for
connection. (page 12)
The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
“AM” cannot be selected. Check the <SRC SELECT>
=
<AM> setting. (See above.)
Sound quality changes when receiving
HD Radio stations.
Fix the reception mode either to < ANALOG / DIGITAL>. (page 8)
Troubleshooting
Continued...
EN02-23_KD-AHD79[J]3.indd 19EN02-23_KD-AHD79[J]3.indd 19 11/22/10 3:11:54 PM11/22/10 3:11:54 PM