Filter
Top Products
38
ENGLISH
Symptoms Remedies/Causes
General
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all. Reset the unit (see page 2).
• “Connect Error” appears on the display. Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 31).
• “Push Reset” appears on the display and the
control panel movement is freezed.
Reset the unit (see page 2). If this does not work, check the
installation.
FM/AM
• SSM automatic presetting does not work. Store stations manually.
• Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
• Disc cannot be played back. Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you
used for recording.
• Disc can be neither played back nor ejected. • Unlock the disc (see page 14).
• Eject the disc forcibly (see page 2).
• Disc cannot be recognized (“No Disc,” “Loading
Error,” or “Eject Error” appears).
Eject the disc forcibly (see page 2).
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
MP3/WMA playback
• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
• Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
EN36-43_SH1000J_001A_2.indd 38EN36-43_SH1000J_001A_2.indd 38 1/17/06 10:47:04 AM1/17/06 10:47:04 AM