Filter
Top Products
10
ENGLISH
3
Select TV as the input source.
Press the MODE button on the monitor or the remote
controller repeatedly to select TV.
4
Select the channel you want to watch.
Press the UP or DOWN button on the monitor or the 5 CH
or ∞ CH on the remote controller to change the channels.
If the channel selection is set to “AUTO” (See page 12.)
You can select only the channels preset by the auto
memory function. (See page 11.)
If the channel selection is set to “MANUAL” (See page
12.)
You can select all the channels. (Channel coverage: VHF
channels 2 to 12, UHF channels 13 to 69)
5
Adjust the volume level on the car receiver.
To turn off the power
Press the POWER button on the monitor or the (power) button on the remote controller.
• Turning off the engine will also turn off the TV tuner system.
08
VIDEO 1
TV
VIDEO 2
Selected channel number appears
on the screen for a while.
Monitor Remote
UP
DOWN
or
CH
CH
H/P
VOL
H/P
VOL
MODE
Monitor Remote
CH
CH
H/P
VOL
H/P
VOL
MODE
MODE
EN09-15.KV-C10[J]f 00.11.28, 4:17 PM10