JVC KW-XG700 Car Stereo System User Manual


 
ENGLISH
19EXTERNAL DEVICES
Before operating, connect either one of the following
(separately purchased) to the CD changer jack on the
rear of this unit. See also page 23.
JVC SIRIUS radio DLP—Down Link Processor, for
listening to the SIRIUS Satellite radio.
XMDirect Universal Tuner Box—Using a JVC
Smart Digital Adapter (XMDJVC100: not supplied), for
listening to the XM Satellite radio.
Refer also to the Instructions supplied with your
SIRIUS Satellite radio or XM Satellite radio.
GCI (Global Control Information) update
If channels are updated after subscription, updating
starts automatically.
“UPDATING” flashes and no sound can be heard.
Update takes a few minutes to complete.
During update, you cannot operate your satellite
radio.
Activate your SIRIUS subscription after
connection
1
2
JVC DLP starts updating all the SIRIUS channels.
Once completed, JVC DLP tunes in to the preset
channel, CH184.
3 Check your SIRIUS ID, see page 26.
4 Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
“SUB UPDT PRESS ANY KEY” scrolls on the display
once subscription has been completed.
Activate your XM subscription after connection
Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect Universal Tuner Box starts updating
all the XM channels. “Channel 1” is tuned in
automatically.
3 Check your XM Satellite radio ID labelled on
the casing of the XMDirect Universal Tuner
Box, or tune in to “Channel 0” (see page 20).
4 Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
Continued on the next page
Listening to the satellite radio
EN14-21_KW-XG700[J]2.indd 19EN14-21_KW-XG700[J]2.indd 19 3/9/07 11:33:16 AM3/9/07 11:33:16 AM