Filter
Top Products
46
ENGLISH
Menu item Selectable setting/item Initial: Underlined
Display
Display Sensor Change the condition for turning off/on the screen and the light of MENU/
ATT button.
Sensor: Select the condition of the screen for turning on.
♦ Motion : The screen turns on when your hand moves closer to
the motion sensor.
♦ Touch : The screen turns on when your finger touches the touch
panel.
♦ Off : The screen is always turned on while the power is
turned on.
Motion Sensitiv.: Change the sensitivity of the sensor for <Sensor>. (☞
above)
♦ High, Low
Time Out Mode: Select the condition of the screen when no operation is
performed for about 10 seconds while <Sensor> is set to <Motion> or
<Touch>. (☞above)
♦ Simple : Source control buttons are displayed, and the light of
MENU/ATT button is turned off.
♦ Backgrnd : The background and clock are shown, and the light of
MENU/ATT button is turned off.
• You can change the background. (☞ page 39)
♦ Black Out : The screen and the light of MENU/ATT button are
turned off.
Input
Audio Input*
1
You can determine the use of LINE IN jacks.
♦ AV-IN : Select to listen to the music from an audio component
such as a portable audio player.*
2
♦ iPod : Select when connecting the iPod/iPhone using the USB
Audio and Video cable for iPod/iPhone. (☞ page 26)
Video Input*
1
You can determine the use of VIDEO IN jack.
♦ AV-IN
♦ iPod
: Select to watch the video from an AV component such
as a camcorder.*
2
: Select when connecting the iPod/iPhone using the USB
Audio and Video cable for iPod/iPhone. (☞ page 26)
Camera Input
♦ On
♦ Off
: Displays the picture from rear view camera when you
shift the gear to the reverse (R) position.
: Cancels.
Navigation
Change the navigation settings. (☞ page 30)
*
1
You can change the setting only when the AV source is turned off.
*
2
When you watch a video of an AV component, select <AV-IN> for both <Audio Input> and <Video Input>.
EN_KW-AVX840JJW.indb 46EN_KW-AVX840JJW.indb 46 11/01/19 13:1911/01/19 13:19