JVC KW-DB60AT Car Stereo System User Manual


 
Menu item
Selectable setting (Initial: [XX])
AUDIO
FADER *3*4
R06 — F06 [00]: Adjusts the front and rear speaker output balance.
BALANCE *4
L06 — R06 [00]: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (VOL ADJ FIX appears if FM is selected.)
L/O MODE
(Line output
mode)
Select if the LINE OUT cord on the rear panel are connected to the rear
speakers or subwoofer through an external amplifier.
SUB.W: Subwoofer
[REAR]: Rear speakers
SUB. W *5
(Subwoofer)
OFF: Cancels.
[ON]: Turns on the subwoofer output.
SUB.W LPF *6
(Subwoofer low-
pass filter)
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL *6
(Subwoofer level)
00 — 08 [08]: Adjusts the subwoofer output level.
HPF *6
(High-pass filter)
ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]/OFF: Activates or deactivates the keypress tone.
TEL MUTING *7
(Telephone
muting)
ON: Mutes the sounds of the unit while using the mobile phone system
(not connected through Bluetooth adapter KS-BTA100).
[OFF]: Cancels.
AMP GAIN
(Amplifier gain)
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
*3 If you are using a two-speaker system, set the fader level to “00”.
*4 This adjustment will not affect the subwoofer output.
*5 Displayed only when <L/O MODE> is set to <SUB.W>.
*6 Displayed only when <SUB.W> is set to <ON>.
*7
To activate this function, select <SRC SELECT>B<R-AUX>B<R-AUX ON>/<R-AUX OFF>.
Menu operations
18
| ENGLISH