Filter
Top Products
27
ENGLISH
Making sound natural
To activate Compression
Compensative (CC) Converter
CC Converter eliminates jitter and ripples,
achieving a drastic reduction in digital
distortion. This processing can be applied to the
analog sources as well as the digital sources;
therefore, you can obtain a natural sound field
from any source.
1 Enter the CCC menu (see page 5).
2 Select “On.”
• When “C.C.Conv.” is turned on, the CCC
indicator is brightened in yellow on the
display.
• To cancel CC Converter, select “Off.”
3 Finish the procedure.
To activate BBE Digital
BBE
Digital* is a digital processing method to
restore the brilliance and clarity of the original
live sound in recording, broadcasts, etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds. BBE Digital
adjusts the phase relationship between the
low, mid and high frequencies by adding a
progressively longer delay time to the low and
mid frequencies, so that all frequencies reach
the listener’s ears at the proper time.
1 Enter the BBE menu (see page 5).
2
Select the effect level.
Ex.: When “1” is selected
• As the number gets higher, the effect
level becomes stronger. When “BBE” is
turned on, the BBE indicator is brightened
in green (with its current level) on the
display.
• To cancel BBE Digital, select “Off.”
3 Finish the procedure.
* Manufactured under license from BBE Sound,
Inc.
Licensed by BBE Sound, Inc. under
USP4638258, 5510752 and 5736897. BBE and
BBE symbol are registered trademarks of BBE
Sound, Inc.
On
Off
Off 1
23
EN25-30_KD-SHX751[EX_EU]5.indd 27EN25-30_KD-SHX751[EX_EU]5.indd 27 05.2.10 4:25:30 PM05.2.10 4:25:30 PM