Filter
Top Products
25
ENGLISH
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
2
Analog Tuning to analog audio only.
Digital Tuning to digital audio only.
Auto Switch between digital and analog
audio automatically.
• If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
• To improve FM reception, see “When an FM stereo
broadcast is hard to receive...,”
11.
• To preset stations automatically, see “Automatic
presetting — SSM (Storing-station Sequential
Memory) (for FM only),” 12.
AnalogDigital
Auto
Off
Local
On
DX
Start
Mode
Mono
DX/Local
SSM
Blend Hold
Mode
Tuning in to stations with
sufficient signal strength
This function works only for FM bands. Once you have
activated this function (selected <Local>), it always
works when searching for FM stations.
1
2
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator lights
up.
Mode
Digital
Off
Local
On
DX
Start
Mode
Mono
DX/Local
SSM
Blend Hold
Analog
Auto
EN11-29_AV_AVX838[J].indd 25EN11-29_AV_AVX838[J].indd 25 10.5.12 4:43:40 PM10.5.12 4:43:40 PM