Filter
Top Products
Insert two rechargeable
batteries in the battery
charger.
1
• Insert them in the correct ª
and · polarity as indicated
inside the battery charger.
• The two batteries will be
recharged separately one after
another.
Recharging the Rechargeable Batteries
Notes on battery replacement
During recharging of the batteries, use two L30 (24A) alkaline batteries,
which is available in electric appliance stores. The built-in clock display
can be retained by changing the batteries within 30 seconds.
■ Caution for use of dry cell batteries:
Be sure to use L30 (24A) alkaline batteries. Manganese batteries cannot be
used to power the unit.
■ Remaining battery power display:
Use the remaining battery power indicator in the display panel as the
reference for identifying the available power.
2
• If two batteries are inserted in the battery charger that has already been
plugged into the power outlet, the first-inserted battery will be re-
charged first.
• Fast blinking refers to one blink per about 1 second, and slow blinking
refers to one blink per about 3 seconds.
Insert the power plug blades
into a household power outlet.
•
Recharging begins with the
battery inserted in position A. The
recharging of two batteries will
complete in about 4-1/2 hours.
• It is possible to recharge about
300 times.
• After recharging completes,
remove the power plug blades
from the power outlet.
Insert batteries in the Main unit.
Insert batteries.
2
Open the battery compartment cover.
1
Close the battery compartment cover.
3
Hold mode
Charge indicator lamps
The hold mode protects the unit against accidental press of control buttons.
It prevents the following acci-
dents:
• Battery exhaustion by turning the
unit on without noticing it.
• Interruption of playback due to
accidental press of a button.
1
2
Rechargeable battery: (BN-R1213)
(supplied)
To a household
power outlet
Card cover
(Open it while pushing the
battery compartment cover.)
Battery
compartment
cover
Battery compartment
cover
Card cover
• Insert them in the correct ª
and · polarity as indicated
inside the battery compartment.
(You can use L30 (24A)
alkaline batteries or recharge-
able batteries only.)
Compartment A
Compartment B
Preparing the power supply
Insert rechargeable nickel metal hydride batteries (BN-R1213, hereinafter referred to as rechargeable batteries) or L30 (24A) alkaline dry cell batteries.
Blinking
Recharge
(or replace).
High
Low
Compartment A
Compartment B
A charging state B charging state Completed
Charging Finished Finished
(Fast on-and-off) (Continuous on) (Continuous on)
(Continuous on)(Fast on-and-off)
Charging Finished
(Slow on-and-off)
MODE
NORM
HOLD
CARD : PUSH RELEASE
CARD
: PUSH RELEASE
1
2
23