Filter
Top Products
English
— 42 —
Removing the hard rubber frame
■
Removing the Unit
Insert the removal tool into the indentations in the hard rubber
frame, and pull it gently until the lock is released.
Accessory4
Removal tool
Removing the Unit
■
Make the faceplate control panel appear.
When the control panel of the faceplate is hidden, the unit will
be locked by the sleeve, making it more difficult to remove
the unit.
Refer to the section “Removing the hard rubber frame” and
then remove the hard rubber frame.
Remove the screw (M4×8) on the back panel.
Insert the removal tool deeply, as illustrated, with the L on the
left and the R on the right.
4
3
2
NOTE
1
Accessory2
Removal tool
L
Screw (M4X8)
(commercially
available)
L
Push upward the both
tools, as shown, and pull
the unit toward you until it
is halfway out. The unit
may drop if you pull it out
completely.
5
Pull the unit all the way out
with your hands, being
careful not to drop it.
6
L