Kenwood DDX310BT Car Video System User Manual


 
24
HD Radio™ tuner
Changing the display information
The preset list containing the station names is
displayed.
• Pressing [TEXT] again to display the text
information for the station currently being
received.
Selecting a station/channel directly
1
2 Select frequency ([FREQ]) or channel
([CH]) to select (1), enter the frequency or
the channel number (2), then confirm the
entry (3).
To clear the entry, press [Clear].
To cancel setting the code, press [Cancel].
Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes to digital or analog audio automatically
according to the receiving condition.
1
2
[Auto] Switch between digital and analog
audio automatically.
[Digital] Select this to tune to digital audio
only.
[Analog] Select this to tune to analog audio
only.
Activating/deactivating TI Standby
Reception
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
If the TI indicator is lit in orange, tune into another
station.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator goes off.)
The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.