Kenwood DDX310BT Car Video System User Manual


 
ENGLISH 31
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page56 )
Preparation:
If you want to use “AV-IN2”, select [AV-IN2] for <AV
Input> setting. (Page47)
No preparation is required for “AV-IN1”.
Indications and buttons on the source
control screen
AV-IN name
Operation buttons
[MODE] Changes the AV-IN name.
Press [ ] or [ ] to select an AV-IN
name.
This setting does not affect the
source name “AV-IN 1”/ “AV-IN 2”
displayed on <Top Menu>.
[MENU] Displays the <Top Menu> screen.
Starting playback
1 Connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals.
2 Select “AV-IN1” or “AV-IN2”as the source.
(Page9)
3 Turn on the connected component and
start playing the source.
Using a rear view camera
To use a rear view camera, a REVERSE lead
connection is required. (Page55 )
Activating the rear view camera
1 Display the <Input> setting screen.
On the <Top Menu> screen:
2
To deactivate: Select [Off] for <R-CAM Interrupt>.
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
DDX491HD/DDX471HD/DDX371/
DDX310BT/DDX3071BT*
2
DDX771*
1
(Hold)
(Hold)
(Hold)
DDX271/
DDX2071*
1
When displaying the picture from the rear view
camera manually, you can change the setting
of the picture using [Zoom]/[Aspect]/[Adjust].
(Page41)
To exit the rear view screen: Press and hold the
same button again.
*
1
This operation works only when <AUD Key Long Press> is
set to [R-CAM]. (Page48)
*
2
This operation works only when <TEL Key Long Press> is
set to [R-CAM]. (Page48)