Kenwood DDX320BT Car Video System User Manual


 
ENGLISH 5
INITIAL SETTINGSINITIAL SETTINGS
4 Enter a four-digit number (1), then
confirm the entry (2).
Press [Clear] to delete the last entry.
Press [Cancel] to cancel the setting.
5 Repeat step 4 to confirm your security
code.
When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].
R Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the <System> setting screen.
On the <TOP MENU> screen:
Press [ ] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
Clock settings
1 Display the <TOP MENU> screen.
On the source control screen:
2 Display the <Setup> screen.
3 Display the <Clock> screen.
4 Set the clock time.
<Radio Data
System>
Synchronizes the clock time with
FM RBDS.
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
Press [Reset] to set the minute to “00”.
5 Finish the procedure.