Kenwood DDX320BT Car Video System User Manual


 
50
R<System> setting screen
< Language>*
1
Select the text language used for on-screen
information.
English (Initial )/Español/Français/Deutsch/
Italiano/Nederlands/Ελληνικά/Português/
Türkçe/Čeština/Polski/Magyar/Руccĸий /
/ / / / / / Bahasa
Indonesia/
–For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/
Portuguese are available. If another language
has been selected, the text language for external
monitors will be set to English.
G UI Language
: Select a language used for
displaying operation buttons and menu items.
English (Initial)/Local (the language selected
above)
< Clock>
Adjust the clock time. (Page 5)
<Beep>
ON (Initial): Activates the key-touch
tone.
OFF: Cancels.
<Remote Sensor>
ON (Initial): Activates the remote sensor.
OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page46)
< Bluetooth Setup>*
2
Configure settings for using a Bluetooth device, such
as connection and other general operations.
Paired Device List: Press [Enter] to show the list
of registered devices. You can connect the device
or delete the registration. (Page36)
PIN Code: Changes the PIN code of the unit.
(Page35)
Device Name: Shows the device name to be
shown on the Bluetooth device— ”DDX****”.
Device Address: Shows the device address of the
unit.
Auto Connect:
ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
OFF: Cancels.
Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
Front Only: From front speakers only.
All (Initial): From all speakers.
Auto Pairing:
ON (initial): Establishes pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
OFF: Cancels.
Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
< AV Key Long Press>
Assigns the function of the AV button when held.
V-OFF
(Initial for DDX415BT/DDX315): Turns off
the screen. (Page8)
APPs: Displays the APPs screen.*
3
(Page19)
R-CAM (Initial for DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272): Displays the
picture from the rear view camera. (Page33)
<DivX® VOD>*
4
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this units Registration Code is overwritten
for copyright protection.
Press [Enter] to display the information.
To return to the previous screen, press [OK].
< Security Code>*
4
Register the security code for the unit. (Page4)
<SI>
Activate or deactivate the security function.
(Page5)
<Serial Number>*
5
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page47)
<Steering Remote Controller>*
4
Assign the functions to the keys on the remote
controller of the steering wheel. ( Contact your
Kenwood dealer for details.)
<System Information>
Displays the version information of the software.
You can update the
software. (Page47)
*
1
“Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
*
2
Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT .
*
3
Only displays the APPs screen when <AV Input> is set to
[iPod] (Page17).
*
4
Only for DDX415BT/DDX315.
*
5
Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
SETTINGSSETTINGS