Kenwood DDX4053BT Car Video System User Manual


 
74 English
Connecting Wires to Terminals
Subwoofer Preout (monaural)
Pin Colour and functions
A4 Yellow Battery
A5 Blue/White Power Control
A6 Orange/White Dimmer
A7 Red Ignition (ACC)
A8 Black Earth (Ground) Connection
Pin Colour and functions
B1/B2 Purpleª / Purple/Black· Rear Speaker (Right)
B3/B4 Grayª / Gray/Black· Front Speaker (Right)
B5/B6 Whiteª / White/Black· Front Speaker (Left)
B7/B8 Greenª / Green/Black· Rear Speaker (Left)
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Vehicle
Red (A7)
Yellow (A4)
Default wiring
Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Connector A
Connector B
Yellow (A4)
Red (A7)
Red (Ignition wire)
Yellow (Battery wire)
(Mute control wire)
Brown
(Power control/antenna
control wire)
Blue/White
(Steering remote control
wire)
Light blue/Yellow
To use the steering wheel remote control feature, you need
an exclusive remote adapter (not supplied) matching your
car is required.
To the power control terminal when using the optional
power amplifier/optional smartphone adapter (KCA-
ML100), or to the antenna control terminal in the vehicle.
(
page 76)
To the terminal that is grounded when either the telephone
rings or during conversation. (To connect the Kenwood
navigation system, consult your navigation manual.)
(Reverse sensor wire)
Connect to vehicle's reverse lamp
harness when using the optional
rear view camera.
Purple/White
(Parking sensor wire)
Connect to the vehicle's parking
brake detection switch harness.
For best safety, be sure to connect
the parking sensor.
Light Green
Extension cable (Accessory 2)
If no connections are made, do not let the cable come out from the tab.
Antenna Cord
FM/AM antenna input (JASO)
Bluetooth Microphone (Accessory 7)
DDX6023BT/DDX6053BT/DDX4023BT/
DDX4053BT/DDX42BT
only
Accessory 1
FUSE ( 10A )
EN_GET0909-001A_EQ.indb 74EN_GET0909-001A_EQ.indb 74 12/11/13 15:2712/11/13 15:27