Kenwood DDX415BT Car Video System User Manual


 
48
SETTINGSSETTINGS
Setting menu items
RDisplaying the <Setup > menu screen
On the <TOP MENU> screen:
You cannot change the <Audio> settings screen
when [STANDBY] is selected on the <TOP
MENU> screen. (Page8)
R<Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
F6 to R6 (Initial: 0)
When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
–To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page42)
Drive EQ (Initial)/Natural/Rock/Pops/Easy/
Powerful/Top40/J
azz/User
<Loudness>
You can activate/deactivate loudness.
ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
OFF: Cancels.
<Xover>*
Adjust
the crossover frequency. (Page43)
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The
volume level will automatically increase or decrease
when you change the source.
15 to +6 (Initial: 0)
< Subwoofer>*
ON (Initial): Activates the subwoofer.
OFF: Deactivates the subwoofer
.
<Bass Boost>
Select your preferred bass boost level.
OFF (Initial)/Level 1/Level 2/Level 3
<Speaker Select>*
Select the size of the connected speaker.
Standard (Initial)/Narrow/Middle/Wide
* When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <SETU
P Memory> screen to change the
setting. (Page47)