Kenwood DDX5015DAB Car Video System User Manual


 
68
RDigital Radio (DAB) (only for
DDX5015DAB)
Cannot receive an ensemble.
Your area is not covered by the ensemble.
The DAB aerial is not properly extended or
positioned.
Adjust the aerial and try the ensemble scanning
again.
Connect an active aerial (not supplied).
R AV-IN1/AV-IN2
No picture appears on the screen.
Turn on the video component if it is not on.
Connect the video component correctly.
R AUPEO!
The application does not work.
The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
RBluetooth
Phone sound quality is poor.
Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for Bluetooth
phone.
Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page36)
For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234.”
Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
Adjust the microphone unit position.
Adjust the echo volume or noise reduction
volume. (Page38)
The unit does not respond when you try to copy
the phone book to the unit.
You may have tried to copy the same entries (as
stored) to the unit.
REFERENCESREFERENCES