Filter
Top Products
4
INITIAL SETTINGSINITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page60)
1
*
<Demonstration>
(Page61)
Activate or deactivate the
display demonstration.
<Language>
(Page62)
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
<Angle>*
(Page8)
Adjust the panel angle.
<R-CAM
Interrupt>
(Page61)
Select [ON] when
connecting the rear view
camera.
<Panel Color>
(Page57)
Select the color of the
buttons on the monitor
panel.
2 Finish the procedure.
The <TOP MENU> screen is displayed.
* Only for DDX7015BT/DDX715WBT .
Setting the security function
R Registering the security code (only for
DDX7015BT/DDX715WBT)
You can set a security code to protect your receiver
system against theft.
1 Display the <TOP MENU> screen.
On the source control screen:
2 Display the <System> setting screen.
3 Display the <Security Code Set> screen.
• Press [K] repeatedly to change the page on
the <System> menu screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4 Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5 Repeat step 4 to confirm your security
code.
Now, your security code is registered.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].