Filter
Top Products
42
OTHER EXTERNAL COMPONENTSOTHER EXTERNAL COMPONENTS
R Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
DDX5902*
2
(Hold)
(Hold)
DDX7015BT*
1
DDX715WBT*
3
(Hold)
• When displaying the picture from the rear view
camera manually, you can change the picture
settings using [Aspect]/[PictureAdjust].
(Page55)
To exit the rear view screen: Press and hold the
same button again.
*
1
This operation works only when <AUD Key Long Press> is
set to [R-CAM]. (Page62)
*
2
This operation works only when <TEL Key Long Press> is
set to [R-CAM]. (Page62)
*
3
This operation works only when <P.BOOK Key Long
Press> is set to [R-CAM]. (Page62)
R Using the parking guidelines
You can display parking guidelines to enable easier
parking when you shift the gear to the reverse (R)
position.
Displaying the parking guidelines
1 Display the <Display> setting screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
To deactivate: Select [OFF] for <Parking
Guidelines>.
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1 Display the <Display> setting screen. (See
the left column).
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
3 Adjust the parking guidelines by selecting
the
mark (1), then adjusting the
position of the selected
mark (2).
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize ] for 2 seconds
to set all the marks to the initial default
position.