Kenwood DPX-3030S Car Stereo System User Manual


 
— 31 —— 31 —
Installation
Installation
When performing a check of the CD operation prior to installation,
place this unit in a horizontal position and perform a loading/eject
of the CD.
2CAUTION
Install onto the car bracket using the supplied screws (M5 × 6
mm, M5 × 7 mm). The holes of the car bracket to use will differ
depending on the car model.
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory1
(M5 × 6 mm)
or Accessory4
(M5 × 7 mm)
Accessory3
(Only for NISSAN car)
Screw (M4X8)
(commercially
available)
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 31