Filter
Top Products
— 35 —
? The songs in the selected folder aren’t played in Folder Select
mode.77
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
? The MP3 File/Folder search takes time.78
✔ Many files are recorded on the media.
☞ When the media directory is complex, the file/folder search can
take time.
? The MP3 related text isn’t displayed correctly.79
✔ A character is entered that this unit can't display.
☞ For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
? The MP3 file time isn’t displayed correctly.80
✔ ---
☞ There are times when it isn’t displayed correctly according to the
MP3 recording conditions.
? The songs in the selected folder aren’t played in Folder Select
mode.102
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
If the following situations, consult your nearest service
center:
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
The messages shown below display your systems
condition.
EJECT: No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.E01
➪
Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
No Disc: No disc has been loaded in the disc magazine.
E02
➪
Load a disc into the disc magazine.
Error 04: No disc has been loaded in the disc magazine.
E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪ Clean the CD and load it correctly.
Error 05: The CD is upside-down.
E05
➪
Load the CD correctly.
Blank: Nothing has been recorded on the MD.
E10
No Track: No tracks are recorded on the MD, although it has a
title.E11
No Music: Media was played that doesn’t have data recorded
that the unit can play. E15
➪
Use media that has data recorded that the unit can
play.
Error 30: The faceplate of the slave unit being connected to
this unit has been removed.
E30
➪
Replace it.
Error 77: The unit is malfunctioning for some reason.
E77
➪
Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
DPX-MP4030(M)_U.S r1 02.2.19 10:32 AM Page 35