Filter
Top Products
— 12 —
English
CD MD AUTO CHANGER CONTROLLER
REP
RDM
3
-
+
4¢PWR
M.RDM D.REP
TRACK DISC
8
/
D.SCN
MHz
DISC
TRACK
FREQ
LEVEL
To prevent fire when the ignition wire (Red) or battery wire
(Yellow) is short-circuited by coming into contact with the
vehicle chassis (ground), only connect the power supply after
making the fuse box connections.
Be sure to press the reset button after installation.
2CAUTION
2WARNING
Connecting Wires to Terminals
Control output
Control input
CD/MD auto-changer
Changer connection wire
FM modulator unit
FM/AM antenna input
FM/AM antenna output
Ground wire (Black) - (To car chassis)
Car fuse box
ACC
Ignition key
switch
Antenna plug
for automobile
Output
Car stereo
with FM tuner
Battery
Display unit
Battery wire + (Yellow)
Ignition wire
+ (Red)
When the disc changer with the O-N selection switch is connected,
set the switch to "O" position to operate the disc changer mode.
CD/MD auto - changer input
Do not install an antenna of radio equipment or distribute the
antenna wire near the changer output wire, for this could
cause malfunction with this unit.
NOTE
KCA-R42FM_U.S(K/En) 02.12.16 9:13 AM Page 12